The RFID Reader is the backbone of the wire-free asset tracking, and environmental and power monitoring solution.
A single RFID Reader is powerful enough to process 140 events per second, or 1,400 sensors monitored simultaneously, and can achieve a read range of up to 300 feet. Because RFID Readers support any combination of our wire-free tags and sensors simultaneously it's easy to add new tags and sensors at any time.
Customers love the power, scalability, flexibility and security of the M250 Fixed Reader and use them in data centers, hospitals and healthcare facilities, manufacturing, construction sites, office areas, and many more locations.
The RFID Locator is like the GPS for the active RFID asset tracking solution.
A RFID Locator adds a precise location to RFID asset tags. When a tracked asset is moved to another location it will receive new location details from the RFID Locator installed in the area.
Customers love the precision and flexibility of the A740 Rack Locator and install them in cabinets (racks) in data centers. In hospitals, healthcare facilities, bank branches and industrial applications RFID Locators are also installed on shelving and racks and in cabinets and fixed containers.
Works with M174 and M172 infrared RFID asset tracking tags.
RFID Room Locators differentiate rooms and areas from general RF Zones.
This RFID Locator adds a room location to RFID asset tags. When a tracked asset is moved it will receive new location details from the RFID Locator installed in the area.
Customers love the convenience of the A750 Room Locator and install them in storage rooms and hard drive disposal containers in data centers. In hospitals, healthcare facilities, bank branches and industrial applications RFID Locators are often installed in storage rooms, hospital rooms, office areas and closets.
Works with M174 and M172 infrared RFID asset tracking tags.
Ideal for: IT Asset Tracking and more. These tags are most often attached to data center assets such as servers, network switches, and other rack or floor standing assets.
This small active RFID Asset Tracking Tag is our most popular tag with over a million used by customers.
Even though it is small it packs a big punch, with long battery life and the ability to work reliably in signal dense and interference heavy environments where other tags won't.
Customers love the accuracy and long battery life of the M174 Active RFID Asset Tracking Tag. They also love the time savings they provide.
Works with A750 and A740 locators for room and rack level location resolution.
Ideal for: Healthcare asset tracking to track beds, crash carts, nurse's stations, and other equipment that moves between rooms and floors of a health care facility. Also for construction, manufacturing, Returnable Transport Items (RTI).
This is a medium-size tag that is sonically welded into a sealed enclosure designed to be easy to clean and disinfect.
Just like the smaller M174 asset tag this tag has long battery life and the ability to work reliably in signal dense and interference heavy environments where other tags won't.
Customers love this tag for its durability and IR enabled location precision.
Works with A750 and A740 locators for room and rack level location resolution.
Ideal for: Harsh environments that benefit from a tag with a sealed, water-resistant, impact-resistant, crush-proof enclosure for general-purpose asset tracking.
The durable enclosure provides a degree of protection in harsh environments; it can withstand salt water splashes, cleaning solutions, germicides, disinfectants, etc. This enclosure design has been evaluated for compliance with Ingress Protection Rating 54 (IP54).
Will perform reliably in extreme temperature environments (from -20 to +70 degrees Celsius).
In addition, the tag performs well after exposure to humidity and hot/cold cycles.
Long battery life (typically up to 4 years).
Ideal for: Agriculture, industrial rentals, general logistics, and the energy sector, but may also be used in data centers to track pallets, forklifts, and other industrial equipment.
This is a larger tag that is attached to assets using a single-use metal clip.
Just like all of our active RFID asset tracking tags this tag has long battery life and the ability to work reliably in signal dense and interference heavy environments where other tags won't.
Customers love this tag because it can be used in hostile environments and is resistant to weather, pesticides, salt, and other corrosives that would destroy other tags.
Next time you are at Home Depot you might see one of these tags hanging from the bottom of a flower cart.
Ideal for: IT asset tracking for laptops, tablets, monitors, portable projectors and other electronic equipment that is easily transportable.
Just like all of our active RFID asset tracking tags this tag has long battery life and the ability to work reliably in signal dense and interference heavy environments where other tags won't.
Customers love the M184 Active RFID Mobile Asset Tracking tag because of its slim design, durability and ability to work on metal surfaces (like laptops).
Tags include a self adhesive backing to easily attach to an asset and are designed to stay with the asset through to the end of the asset's life.
Bonus: Use these tags to solve logistics challenges and auto-detect returned IT equipment without opening boxes.
Ideal for: Data center environmental monitoring, including colocation data centers, but can be used for most indoor temperature and humidity monitoring needs.
A surface-mounted temperature and humidity sensor design with excellent battery life, the R156 Temperature & Humidity Sensor is placed at the precise location at which a temperature reading is needed. Typically this is on racks and cabinet doors in a data center, but the sensor can be used to gather temperature and humidity data anywhere within range of an RF Code fixed reader.
Customers love this sensor because there are no wires to mess with which makes them easy to install.
Ideal for: Data center environmental monitoring, including colocation data centers, but can be used for most indoor temperature and humidity monitoring needs.
A sensor tag with a remote temperature sensor connected by a small cable, allowing users to separate the point at which the temperature reading is sampled from where the sensor electronics and RF transmitter are located. Common applications include gathering temperature readings under an RF shielded raised floor or within aluminized ductwork which acts as a barrier for RF transmission, or when monitoring industrial machinery where the sensor is located within shielded components such as commercial freezers.
Ideal for: Data center environmental monitoring, including colocation data centers. Especially where liquid cooling is used for high performance compute and NVIDIA.
A film-based sensor that reports when water or water-based fluids come in contact. Typically deployed where liquid cooling is used and also under raised floors to detect condensation of coolant leaks, or used near overhead CRAC in non-raised floor data centers. Used for industrial applications where protection against fluid is important.
Customers love this wire-free RF sensor because of its hassle free installation, and it makes adding fluid detection to the data center white space for liquid cooling very easy.
Ideal for: Data center environmental monitoring, including colocation data centers. Also used for distributed IT locations like edge sites and server rooms. Also suitable for healthcare, manufacturing and more.
Sensor that monitors whether a door is open or closed. Can be used on any door that has a suitable surface for mounting. Common uses include IT closet doors, IT cabinet doors, colocation cage doors and hard drive disposal containers.
Customers love these sensors because they don't need wires for installation and because the sensors can be used on a variety of doors.
Ideal for: Data center environmental monitoring, including colocation data centers. Also used for distributed IT locations like edge sites and server rooms.
Sensor that monitors dry contact or closed-loop monitoring circuit. Typically used for monitoring UPS and other electrical systems with dry contact terminals. May also be used as a remotely wired door sensor.
Customers love these sensors because not all data centers are the same and this sensor helps them monitor a variety of equipment that is from different manufacturers and older in design.
Ideal for: Data center environmental monitoring, including colocation data centers.
This sensor takes two pressure readings from inlets and reports the difference between the two readings in PSI/kPa. This sensor is typically used to measure the pressure difference between the plenum of a raised floor data center and the above the floor where the cabinets are mounted.
Customers love this sensor because it helps them identify and resolve airflow problems that are impacting cooling and power efficiency in their data centers.
Ideal for: Data center environmental monitoring, including colocation data centers.
Family of tags that interface with select Rack Power Distribution Units (RPDUs) produced by Chatsworth International and Vertiv/Geist and Legrand. The tag utilizes the Ethernet port of the RPDU as its communications interface.
Customers love this sensor because it doesn't require a network port and enhances security by taking smart PDUs off the network while still providing the ability to monitor the PDU.
Ideal for: Data center environmental monitoring, including colocation data centers.
Family of tags that interface with the select Rack Power Distribution Units (RPDUs) produced by Server Tech and APC. The tag uses a serial connection to interface with the RPDU.
Customers love this sensor because it doesn't require a network port and enhances security by taking smart PDUs off the network while still providing the ability to monitor the PDU.
Ideal for: Data center environmental monitoring, including colocation data centers, plus a variety of other applications.
Sensor that detects presence of AC voltage in a power cable 6-11mm in diameter. Typically used to monitor 110-240V circuits that are in cables rated to 30 amps. This could be power cables that feed servers and switch power supplies in the datacenter. Industrial or commercial applications include monitoring the power cables of refrigerators, lights, or the monitoring of a circuit past a contact switch for usage monitoring.
Ideal for: Data center environmental monitoring, including colocation data centers, plus a variety of other applications.
Sensor that detects the presence of AC voltage in a power cable 11-28mm in diameter. Typically used in the data center to non-invasively monitor the power feeds for RPDUs or PDU feeds. Other applications include large industrial machinery.
Ideal for: Edge data centers, server rooms, network closets, MDF, IDF.
This is a cloud enabled room monitoring device that has an IP camera with motion detection, thermal imaging. temperature sensor and humidity sensor built in.
Customers love the fast and easy installation and real time visibility they get inside distributed IT rooms when they can't be there.
Sentry is used by Managed Service Providers (MSPs) and in-house IT teams at many locations like Bank Branches, Retail Stores, Water Treatment Plants, Medical Offices. Use Sentry at any location where you want to get real time visibility without being there.
Ideal for: Edge data centers, server rooms, network closets, MDF, IDF.
This wire-free fluid sensor works with the Sentry device via Bluetooth connection..
Customers love the quick connectivity and the wireless design for the ability to place the fluid sensor exactly where it is needed.
Sentry is used by Managed Service Providers (MSPs) and in-house IT teams at many locations like Bank Branches, Retail Stores, Water Treatment Plants, Medical Offices. Use Sentry at any location where you want to get real time visibility without being there.
